Filter By:
Seatposts

$32.99
• Aluminum
• Coil spring provides plush suspension
• Adjustable pre-load design
• Micro-adjust seat clamp
• 450 grams

$29.99 - $31.99
The Tuner pivotal post features a 220mm length with grooves evenly spaced every 15mm for cut lines or seat height indication.
- 6061 alloy forged post
- Weight: 4.6oz
- Clamp Style: Pivotal

$129.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post
- Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head
- Angled clamp bolts allow easy tool access for hassle free adjustment and tightening
- The rubber seatpost grommet fully seals the post to prevent water entering your seat tube
- Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon
- Wide lower cradle gives extra rail support for lightweight saddle rails
- Narrow upper cradle increases the amount of forward/back saddle adjustment
- Tilt Adjustment 6° up 12° down with Zero offset

$32.99
- RaceFace Ride XC Seatposts made of forged AL-6061
- Forged, anodized and shot peened AL-6061 mast
- 2-bolt head holds saddle securely while retaining easy adjustability
- Weight: 295 g

$19.99
Medium length 150mm long stealth seatpost constructed from lightweight 6061 aluminum. Compatible with Pivotal seats.
Product Specifications
- Material: 6061-t6 Aluminum
- Size: 25.4mm Diameter
- Length: 150mm
- Compatibility: Stealth (Also Works With Pivotal)
- Weight: 5.0 Oz

$19.99 - $39.99
New updated design! Leapfrogging off the original Pivotal seat system, the Stealth system offers a way to install your seat without fishing an allen key through the top patch. With the Stealth system, the need for a patch and slot on the seat is eliminated and the anchoring seat bolt can be threaded from the bottom using a Stealth seat post. Kink Stealth seat posts are made from a single, 3D-forged piece of 6061-T6 aluminum and are available in assorted lengths. Note: You can also use traditional Pivotal seats with Stealth seat posts.
TECH SPECS
- Length: Medium 180mm, Large 330mm
- Diameter: 25.4mm
- Material: 3D Forged 6061-T6 Aluminum
- System: Stealth
- Weight: Medium 4.1oz, Large 6.8oz

$17.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

$169.99
The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations.
- Finish: Matte Black UD Carbon/Matte Black Head
- Weight: Zero offset, 210g; Setback offset, 223g
- Head offset: 0mm; 20mm
- Length: 350mm w/ 80mm min. insert
- Quill size: 27.2mm
- Rail clamps: 7mm round; 7mm x 9mm oval (both included)
- Material: EC70 carbon

$36.99
Dimension Suspension Seatpost
- Clamp Style: Std Rails
- Diameter: 27.2mm
- Length: 350mm
- Material: Aluminum
- Max Height: 255mm
- Min Height: 130mm
- Offset (mm): 0mm
- Seatpost Type: Suspension
- Travel (mm): 35mm
- Weight: 450g

$24.99 - $28.00
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- 0mm offset

$285.00
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish
- Seat Post Diameter: 31.6mm
- Seat Post Length: 400mm

$285.00
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish

$172.00
The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types.
- Distinctive Zipp cosmetics
- Unidirectional Carbon fiber tuned for ride comfort
- Lightweight clamping system
- Lifetime warranty

$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$70.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets.
- Convenient finger adjustment of saddle angle
- Unidirectional carbon shaft, forged aluminum head
- No rider weight limit
- 5 year Whisky warranty
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$105.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7.
- Carbon shaft absorbs trail chatter
- UD carbon shaft, forged aluminum head

$44.99 - $58.99
WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.

$55.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings.
0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment.
30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

$64.00
TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.

$479.95
Thomson Covert Elite Dropper Seatpost-31.6 150mm Black Internal.
We've set the bar with the Thomson covert black dropper post. It's designed around internal routing for clean installation and an updated shift style remote lever for effortless operation.
The Thomson Covert Dropper includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it's fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available.
- Custom made Norglide bearing bushings and Trelleborg O-Rings and seals
- Thomson saddle clamps and fasteners
- Motul Oil for durability and precision quality.
- The return speed is damped in the last 15mm of upward travel to be gentle on your seating area.
- 60mm (Ø27.2 only), 100mm, 125mm, 150mm of infinite travel.
- Passes ISO 4210 fatigue and strength tests for seat posts.

$121.95
Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.

$121.95
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.

$169.95
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.

$169.95
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.

$249.00
Syntace's HiFlex full carbon seatpost is centered around a highly technical carbon design that evenly distributes rider load as well as damps vibrations without loss of control. Its extra-deep 52mm bottom clamp offers optimal rail support while a shallow 30mm top clamp allows for extra fore-aft adjustment. The two-bolt micro adjust clamp offers precise saddle angle adjustments and features bolts arranged in line with the direction of bump forces for increased strength Ideal for anything from road to mountain.
- Improved vibration damping and directional stability
- Bob-damping mechanism for full suspension bikes
- Compatible with most Carbon rails
- Weight: 212g
- Max. Height: 310mm
- Min. Height: 40mm

$225.00
This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options.
- FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6.
- Engineered to have the saddle move in a perfect arc, aka a back & downward motion.
- Setback: 20mm/0mm
- Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt.
- Length: 380mm/450mm
- Approximate Weight: 209g
Page 1 of 3
Next page