$10.99 - $15.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
- Ball-inflating needle for footballs, basketballs and more
- Foot-operated - Gauge - Thumb lock
Designed for Fat and Semi Fat tire bikes, the Big Bore packs massive volume per stroke and a unique head that still works with winter gloves on - Oversized press-on Schrader and Presta head won't accidentally remove valve cores and can be easily used with thick gloves. - Flexible hose attachment allows for aggressive pumping without fear of damaging valve stems. - Inverted barrel design allows for high volume in a compact size. - Coarse machined aluminum barrel for extra grip. - Water bottle boss mount with elastomer band included. - Max pressure: 50psi (3.5bar) - Volume per stroke: 90cc
$34.99 - $40.00
The Air Tool Flex MTB/Road uses an inverted chamber design that allows for quick fill-up on mountain tires but can still reach the high pressures needed for road tires. - Twin Schrader and presta thread on T-head - Inverted barrel design allows for efficient high volume and high pressure pumping - Lightweight and compact hose with built-in flex to prevent excess stress on valve stems - Water bottle boss mount included
$49.99 - $59.99
Thanks to its smaller-diameter barrel, with Specialized's Air Tool HP Floor Pump it's easier than ever to inflate high-pressure tires. It also features Specialized's SwitchHitter head that works with Presta and Schrader valves, quality steel construction for excellent durability, and a three-sided base for superb stability. Plus, you'll love the comfortable, wide handle, easy-to-read oversize gauge and the nice, long hose.
Back by popular demand, the Air Tool MTB Floor Pump is better than ever. Designed for low pressure, high volume tires, it provides precise pressure to ensure that your tires are set up for whatever the trail throws at you. - Oversized 3" (76mm) gauge has 0-40 PSI range for maximum resolution when filling large tires. - Massive 508cc volume aluminum barrel pushes enough air to seat tubeless tires. - Ergonomic Wing handle with pressure relief valve. - Auto selecting SwitchHitter II technology. - Includes spare rubber seal for head. - Max pressure: 40 PSI (2.7bar) - Volume-per-stroke: 508cc
The Air Tool MTB pump is Speialized's most dependable and durable big-volume frame pump. It's intended to be carried on the bike for use in all off-road conditions. You'll find that it features a new inverted design, so it greatly increases air capacity, which reduces pump time by up to two minutes. - All new inverted, double chamber design increases the air handling capacity by 28% compared to our previous design, reducing pumping time by up to two minutes. - Twist locking head reduces size and can be easily converted to fit Presta or Schrader valves. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 60 PSI (4.1bar) - Volume-per-stroke: 100cc
Specialized's Air Tool Sport Floor Pump boasts all-steel construction, durable internals, a long hose, a sturdy handle and a three-sided base for easy pumping and excellent stability. You also get Specialized's SwitchHitter head that automatically adapts to fit Presta and Schrader valves, and an easy-to-read, 2-inch gauge to make dialing in the right pressure a breeze.
This durable frame pump with SwitchHitter head automatically adjusts for Schrader or Presta valve tubes and shows pressure on a rotatable gauge. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Gauge body rotates for easy viewing. - Durable plastic barrel with aluminum shaft to reduce flex and improve efficiency. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc
This durable pump with SwitchHitter head automatically adjusts for Schrader or Presta valves. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc
Specialized's Air Tool UHP Floor Pump makes it easy to dial in your fork and shock. With a cast aluminum base and an aluminum barrel, this sturdy floor pump reaches 350psi with ease. What's more, the micro air bleeder makes it easy to set the perfect pressure.
$15.00 - $24.99
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
$9.00 - $17.99
Specialized's Threaded CO2 Cartrdiges can be used with Specialized CPRO2 Trigger and Air Tool COMBO2 pump inflators.
In 1982 SILCA developed the first regulated CO2 inflator. As Claudio himself explained, "Before EOLO, you had to turn the cartridge and pray!" Giving the user the ability to regulate the flow of gas into the tire was the key to the widespread adoption of compressed gas for roadside use. EOLO III builds on the SILCA tradition by using an ultra-precise spool valve design with a light-action spring to give the user perfect control of the flow into the tire. The full metal construction of the EOLO III contains no plastic parts and is manufactured entirely from 6063 series aluminum and stainless steel. Hardened tool steel puncture pin is more than 2X the hardness of traditional puncture pins to ensure smooth operation in all conditions over many years. - 6063 series aluminum body with Red-White-Green Insulators - Lightest spring action of any spring-valve regulator - Hardened tool steel puncture pin - 'Camera-lens' style valve head allows for easy installation even in disc wheels
Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve
Tattico is a highly efficient mini-pump with an ergonomic design that makes it easy to use in all conditions. - Tattico has 4 unique features: - Inverted Design: Tattico is designed backwards from most pumps. The hose and valving is hidden inside the inner tube rather than the outer cylinder delivering up to 10% more air per stroke compared to pumps of similar length. - Adaptable Cup Seal: Other pumps seal with o-rings which lose effectiveness as friction heat increases. The Tattico Adaptable Cup Seal grows with the tube, resulting in ultimate efficiency at all temperatures. - Hidden Heat Sink: There is a heat sink hidden at the end of the barrel which absorbs a high percentage of the heat generated when pumping. This keeps the rest of the pump cool, even at high pressures. - Twin Tube Insulated Grip: Tattico handle uses 2 thin tubes separated by an insulating air gap to keep hands cool. This results in better grip and control without risk to hands even when inflating multiple tires to high pressures. - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - 120psi - 9-1/2" length - Includes direct-mount bracket with retaining strap
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
$9.99 - $224.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.
$8.99 - $99.99
Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride. - Precision-machined body and head for improved reliability and ease of use - CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use - Fits Presta and Schrader valves without adapters - Compatible with threaded cartridges - Includes two 16g CO2 cartridges & insulator sleeve - Small size fits in saddle bag or jersey pocket - Size: 45 x 32 x 21 mm - Weight: 24 grams (without CO2 cartridge)
Composite and steel floor pump – Arcade White A strong and dependable pump belongs in every garage or basement. Our redesigned Comp floor pump features a big 3" integrated gauge, steel barrel and the Dual Head for Presta and Schrader valves. With included sport ball needles and classic good looks, it’s designed for smooth, efficient and accurate inflation. - Super-tough steel barrel and plunger with a composite base - Anatomically designed handle for comfortable air compression - Dual Head fits both Presta and Schrader valves - Oversized 3 inch 160 psi dial gauge - Pressure rated to 200 psi - Needles included for pumping up sports balls - Large base for stability - Rebuildable - Height: 25”
Planet Bike's Red Zeppelin CO2 bike tire inflator features rugged metal construction and the Airflation control knob for reliable and accurate inflation. It accepts all sizes of threaded cartridges and the inflator head threads directly onto either Presta or Schrader valves without an adapter. It'll make quick work of roadside repairs. - Precision-machined body and head with Airflation Control 2.0TM knob for improved reliability and ease-of-use - Threads directly onto Presta or Schrader valve without adapter - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 48 x 40 x 25 mm - Weight: 56 grams
You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."
High-pressure shock pump with gauge Our Shockmate 3.0 high-pressure bicycle suspension pump is designed to efficiently and accurately maintain your bike’s suspension to ensure that your shocks are neither too stiff nor too soft. It's compact and rugged and features an 8" swivel hose and alloy valve head for secure attachment and easier pumping. The easy-to-read gauge and bleeder valve help you fine-tune the suspension sag on your bike's front and rear shocks to give you the best ride performance. Whether you have a mountain bike with full suspension or just a fork shock, take the Shockmate 3.0 along on your next backcountry adventure. - Compact and rugged design is ideal for backcountry adventures - Locking T-handle for comfortable and efficient pumping at high pressure - 8" swivel hose and alloy valve head for secure attachment and easier pumping - 1.5" industrial grade gauge is precise and easy to read when setting suspension shock sag - Bleeder valve for fine-tuning pressure - Rebuildable - Length: 260mm - Weight: 149 grams
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$19.99 - $24.99
A simple and reliable twist-to-inflate system, the Windstream Twist inflator head works with all 3/8" threaded inflation canisters — but with a twist. With no spring on the head, airflow is controlled by twisting the cartridge rather than pushing. Auto seals when not engaged. - Compact, lightweight design fits in tight spaces - Press-on for both Presta and Schrader valves - Compatible with 3/8” threaded cartridges - Rotate CO2 cartridge to regulate inflation - Kit includes CNC-machined aluminum inflator head with a green finish for better visibility
Page 1 of 9 Next page